OLED: Components, Working, Advantages and Disadvantages

OLED Components (components and working is little technical, so can be neglected)

Like an LED, an OLED is a solid-state semiconductor device that is 100 to 500 nanometers thick or about 200 times smaller than a human hair. OLEDs can have either two layers or three layers of organic material; in the latter design, the third layer helps transport electrons from the cathode to the emissive layer. In this article, we'll be focusing on the two-layer design.

An OLED consists of the following parts:

Substrate (clear plastic, glass, foil) - The substrate supports the OLED.

Anode (transparent) - The anode removes electrons (adds electron "holes") when a current flows through the device.

Organic layers - These layers are made of organic molecules or polymers.

Conducting layer - This layer is made of organic plastic molecules that transport "holes" from the anode. One conducting polymer used in OLEDs is polyaniline.

Emissive layer - This layer is made of organic plastic molecules (different ones from the conducting layer) that transport electrons from the cathode; this is where light is made. One polymer used in the emissive layer is polyfluorene.

Cathode (may or may not be transparent depending on the type of OLED) - The cathode injects electrons when a current flows through the device.

How do OLEDs Emit Light?

OLEDs emit light in a similar manner to LEDs, through a process called electrophosphorescence.

The process is as follows:

1. The battery or power supply of the device containing the OLED applies a voltage across the OLED.
2. An electrical current flows from the cathode to the anode through the organic layers (an electrical current is a flow of electrons). The cathode gives electrons to the emissive layer of organic molecules. The anode removes electrons from the conductive layer of organic molecules. (This is the equivalent to giving electron holes to the conductive layer.)
3. At the boundary between the emissive and the conductive layers, electrons find electron holes. When an electron finds an electron hole, the electron fills the hole (it falls into an energy level of the atom that's missing an electron). When this happens, the electron gives up energy in the form of a photon of light.
4. The OLED emits light.
5. The color of the light depends on the type of organic molecule in the emissive layer. Manufacturers place several types of organic films on the same OLED to make color displays.
6. The intensity or brightness of the light depends on the amount of electrical current applied: the more current, the brighter the light.

OLEDs offer many advantages over both LCDs and LEDs:

·        OLED substrates can be plastic rather than the glass used for LEDs and LCDs.

·        OLEDs are brighter than LEDs. Because the organic layers of an OLED are much thinner than the corresponding inorganic crystal layers of an LED, the conductive and emissive layers of an OLED can be multi-layered.

·         Also, LEDs and LCDs require glass for support, and glass absorbs some light. OLEDs do not require glass.

·        OLEDs do not require backlighting like LCDs. LCDs work by selectively blocking areas of the backlight to make the images that you see, while OLEDs generate light themselves.

·        Because OLEDs do not require backlighting, they consume much less power than LCDs (most of the LCD power goes to the backlighting).

·        OLEDs are easier to produce and can be made to larger sizes. Because OLEDs are essentially plastics, they can be made into large, thin sheets. It is much more difficult to grow and lay down so many liquid crystals.

·        OLEDs have large fields of view, about 170 degrees. Because LCDs work by blocking light, they have an inherent viewing obstacle from certain angles. OLEDs produce their own light, so they have a much wider viewing range.

Problems with OLED 

·        Lifetime - While red and green OLED films have longer lifetimes (46,000 to 230,000 hours), blue organics currently have much shorter lifetimes (up to around 14,000 hours[source: OLED-Info.com]).

·        Manufacturing - Manufacturing processes are expensive right now.

·        Water - Water can easily damage OLEDs.